A dry dock floating walkway is a storage space that’s not flooded or subjected to heavy rainfall. A dry dock is perfect for storing your boat when no power or water is flowing.
A dry dock helps prevent the damage that can come from an unexpected crisis and keep your watercraft safe from ravaging storms. But what if you need a restful night at home after a long day at sea? Or perhaps you’d like to ensure that your precious replica watches remain intact when the weather changes? Well, imagine this: You have just left work when you hear something crashing through the trees — it’s probably a thunderstorm! You sprint home and run up to your boat, only to find it completely submerged in water! What would you do?
That’s the question we answer here, with plenty of practical tips for a safe dry dock. Read on for more information.
A dry jet boat dock is a perfect place for storing your boat when no power or water is flowing. But how do you keep water from seeping into your dry dock and damaging your boat? Keep reading to find out.
You’ll need a place to store the boat that’s not exposed to heavy rainfall, so it can be protected from storm damage. If you don’t have a garage or a shed, consider renting a storage space at a local marina or boat club. You can also construct your dry dock on land with basic carpentry skills and supplies. The first step is to build the dock’s walls, which can be made of concrete blocks, cinder blocks, bricks, or stones. Next, you may want to install one-way valves in the walls so that they can hold water while still allowing it to drain outward toward an outlet or drainpipe. This will allow you to pump water out of your dry yamaha boat dock when necessary but won’t let water back in once you turn off the pump.
Once your walls are constructed, dig out the area at least four feet deep and then fill it up with gravel and sand until it reaches ground level again (with about two feet of room above ground). Next, add another layer of gravel and sand before placing the floorboards on top of them all (you’ll want these boards to be sturdy enough that they won’t rot away a layer of concrete over the entire floor. You can also use gravel as a base for paving the entire area if you prefer, or you can just make sure there are at least two inches of gravel covering the bottom of your dry dock.
Next, construct your boat lift and attach it to the walls. You will likely need a permit from your local building department before beginning construction on your dry boat dock, since it’s an extension of your home and may be subject to zoning laws. Your local building department can help you with this process and provide you with any necessary permits.
Once the lift is built, you’ll need to install a water pump to drain water from it when necessary. If you have an existing well capable of producing enough pressure, then simply run a hose from the well down into the dry dock through one side wall and out through another wall, using one-way valves at each end of the hose so that water can only flow outward. If you don’t have access to a well or other source of water near where you want to build your dry dock, consider installing an above-ground garden hose fixture on one side wall along with some valves so that water can be drained out but not back in again unless someone manually turns off the valve.
Are you looking for marine equipment suppliers in UAE? Contact PMS-ME today.
Comments
Post a Comment